16 ceramic smd crystal model: fx425 series features ? ultra low profile ? fundamental all dimensions are in millimeters. options ? tolerances to 10 ppm ? stabilities to 10 ppm ? temp range to -40oc ~ +85oc learn more about: part marking identification t ape and reel s pecification internet required all dimensions are in millimeters. ? part number selection 12.000 ~ 50.000 12.000 ~ 50.000 fx425a fx425b model number part number 518-frequency-xxxxx 519-frequency-xxxxx ? part number learn more - internet required frequency range (mhz) 1 tighter tolerances, stabilities, and wider temp ranges available. note: the above specifications, having been carefully prepared and checked, is believed to be accurate at the time of publication; however, no responsibility is assumed by fox electronics for inaccuracies. all specifications subject to change without notice. rev. 5/17/05 parameters frequency range frequency tolerance @ 25oc frequency stability, ref @ 25oc over operating temp range temperature range operating (t opr ) storage (t opr ) shunt capacitance (co) load capacitance (c l) drive level aging per year reflow soldering temperature moisture sensitivity level (msl) termination finish 12.000 ~ 50.000 mhz 50 ppm 1 50 ppm 1 -10oc ~ +60oc 1 -40oc ~ +85oc 7pf 10 pf ~ series 0.1 mw 5.0 ppm 260oc x 10 seconds (2 cycles) 1 ni/au ? standard specifications 1 12.000 ~ 12.999999 13.000 ~ 50.000 frequency range (mhz) fundamental fundamental 120 80 operating mode max esr ? ? ? ? ? fox electronics 5570 enterprise parkway fort myers, florida 33905 usa +1(239) 693.0099 fax +1 (239) 693.1554 http://www .foxonline.com emea munich, germany +49 0 89.90936870 fax +49 0 89.90936776 | asia hong kong +852.2854.4285 fax +852.2854.4282 ? 2005 fox electronics max (unless otherwise noted)
|